The V2000-c is a standalone access control keypad that utilizes RFID card technology and a numeric keypad for secure entry. To ensure proper setup, please verify the following technical specifications:
Dedicated leads for external doorbell equipment activation. Programming Guide V2000-c Rfid Access Control User Manual
Before powering up the system, verify the power supply is and ensure correct polarity connections. The V2000-c is a standalone access control keypad
To program the device, you must enter Programming Mode. The default Master Programming Code is typically or 123456 . Entering and Exiting Programming Mode To program the device, you must enter Programming Mode
If you need help tailoring this to a specific layout, let me know:
| Parameter | Specification | |:----------|:--------------| | Operating Voltage | DC 12V ±10% | | Unlock Current | ≤1000mA | | Standby Current | ≤60mA | | User Capacity | 1000 standard users | | Read Distance | 5~15cm | | Supported Card Type | EM 125kHz standard card | | Working Temperature | -10°C to 70°C | | Working Humidity | 10% to 90% | | Dimensions | 117 × 117 × 21 mm | | Unlock Relay Rating | 12VDC / 2A | | Alarm Output | 20A max |
⚠ Change the master code immediately after first installation.