Typically a .bin or .ssu file tailored specifically for the WS-6933.
Updating the firmware on your satellite finder is essential for maintaining accurate signal detection and ensuring your device remains compatible with the latest satellite transponder data. This guide provides a detailed walkthrough on how the update process works, from preparation to final verification. Why Update the Satlink WS-6933?
Follow these steps carefully to ensure a smooth and successful update. Step 1: Download the Required Files
If you are currently trying to get the update to "work," follow these standard steps: Preparation: Connect your WS-6933 to your PC using the located on the side of the device. Software Tool: satlink ws 6933 software update work
: Windows PCs require the specific CH340 serial driver installer to recognize the internal hardware components of the Satlink meter.
: Open the update program as an administrator, select the downloaded .bin file, and initiate the upgrade.
A: Not directly. You need Windows via Boot Camp or a VirtualBox with USB passthrough. The driver is Windows-only. Typically a
typically uses a specialized RS-232 serial to USB cable, which connects the meter's data port to the computer's USB port.
You will need the Satlink PC Upgrade Tool (often called Satlink Tools or WS-6933 PC Software).
: Connect the WS-6933 to your computer using the USB cable provided with the device. Why Update the Satlink WS-6933
Once the tool says "Upgrade Success," the meter will reboot. It is highly recommended to perform a "Factory Reset" from the System Menu. This clears out old data fragments that might conflict with the new software version. Troubleshooting Common Issues
Finding the right firmware version is crucial for a successful update. Here are the primary methods for locating it.