Measure earth leakage and patient leakage currents (must be below mandated safety limits). C. Performance Testing (Calibration)
: Standard operation is typically 10 seconds ON followed by 30 seconds OFF.
This overview outlines the core components and maintenance frameworks typically found in the technical documentation for the . 1. Overview of the Surgitron 4.0 Dual RF
If the unit fails to power on, check the line fuses located at the rear power entry module. Replace only with the specified rating (e.g., T2A or T4A depending on voltage). Common Troubleshooting Error Codes ellman surgitron 4.0 dual rf service manual
A: Yes, Ellman provides a secure PDF to registered owners. It is watermarked with your facility name.
Electrosurgical Analyzer (e.g., Fluke Biomedical QA-ES Series or equivalent).
A thorough preventive maintenance inspection should be conducted at least annually, or according to your facility’s biomedical policy. Visual Inspection Measure earth leakage and patient leakage currents (must
Note: If the measured output power deviates by more than ±10% or ±3 Watts (whichever is greater) from the panel setting, internal calibration is required. 5. Troubleshooting and Error Codes
Provide a of the handpieces and accessories.
Technical Service & Maintenance Guide Device Class: High-Frequency (Radio Frequency) Electrosurgical Unit (ESU) Manufacturer: Ellman International, Inc. This overview outlines the core components and maintenance
Typically up to 120 Watts (depending on the specific model configuration).
Later that day, Jack received a call from a local hospital, reporting an issue with their SurgiTron 4.0 unit. With the service manual at hand, Jack and his team were able to quickly diagnose and resolve the problem over the phone. The hospital's medical staff was able to continue with their scheduled procedures, thanks to Jack's expertise and the detailed guidance provided by the Ellman SurgiTron 4.0 Dual RF service manual.
: Easily accessible line fuses can be replaced by prying open the fuse door on the rear panel.
: 100 VAC, 110/120 VAC, or 240 VAC ( Line Frequency : 50 / 60 Hz Power Consumption : Maximum 330 VA Current Draw : 1.3 A (at 240V) to 2.90 A (at 120V)